In the past, packaging was seen by eCommerce sellers as little more than a tool to “protect the product.” But as environmental regulations tighten worldwide, packaging has become a critical compliance issue for cross-border eCommerce. The European Union, the United Kingdom, Australia, Singapore, and Mainland China are all simultaneously tightening their packaging rules. Non-compliance can lead to shipments being held at customs, hefty fines, or even product delistings.

In this edition of the e+Solutions eCommerce Logistics Guide, we’ll break down the packaging regulations of five major markets from an online seller’s perspective, helping you avoid pitfalls before your next shipment goes out.

*Reminder: Packaging regulations and their implementation details evolve over time. Before shipping goods or finalising packaging design, sellers should always consult the latest official announcements from local authorities to obtain the most accurate compliance information.

Why Packaging Compliance Matters More Than Ever?

Governments around the world are actively promoting the “circular economy,” shifting the responsibility for packaging waste from consumers to producers and brands. Whether you are a private-label brand, a distributor, or a pure-play reseller in cross-border eCommerce, once your product reaches the end consumer in another market, you may be classified as a “Producer”, and become subject to reporting, fees, and even packaging design obligations.

In other words, “I just sell products, I don’t make the packaging” is no longer a valid excuse.

網店物流 電商物流 過度包裝 包裝限制 Excessive Packaging packaging regulation Cross-border ecommerce Cross-border logistics

1. European Union – Packaging and Packaging Waste Regulation (PPWR)

The EU Packaging and Packaging Waste Regulation (PPWR, (EU) 2025/40) entered into force on 11 February 2025 and become mandatory from 12 August 2026. It applies to all businesses placing packaged goods on the market across the EU’s 27 Member States regardless of where the goods are produced or shipped from.

Key points for eCommerce sellers:

  • Chemical restrictions: From 12 August 2026, food-contact packaging is subject to strict limits on PFAS (per- and polyfluoroalkyl substances) and heavy metals (combined lead, cadmium, mercury and hexavalent chromium ≤ 100 mg/kg).
  • Appointment of an Authorised Representative (AR): Non-EU businesses without a local legal entity must appoint an AR in each Member State of sale to handle EPR (Extended Producer Responsibility) registration, reporting, and fee payment.
  • Document Retention Period: Single-use packaging technical and compliance documentation should be retained for 5 years, while reusable packaging documentation should be retained for 10 years.
  • Enforcement risk: Penalties are set individually by each Member State, for example, France imposes substantial administrative fines and daily accumulating penalties for failure to fulfil EPR obligations.

Future Roadmap

  • Sellers can plan their packaging strategies around these upcoming timelines:
    • 2028: Mandatory material composition labelling and introduction of recyclability grades (Grade A/B/C).
    • 2030: Minimum recycled plastic content required; packaging must meet at least Grade C recyclability.
    • 2038: Recyclability thresholds tighten further.
    • 2040: Higher recycled plastic content requirements for food and beverage packaging.

2. United Kingdom – Packaging Extended Producer Responsibility (pEPR) + Plastic Packaging Tax (PPT)

The UK operates two parallel packaging compliance regimes:

  1. Packaging Extended Producer Responsibility (pEPR) – Effective 1 January 2025
    • Reporting thresholds: Businesses with an annual turnover ≥ £1M and supplying ≥ 25 tonnes of packaging are required to submit data reporting. Larger businesses (annual turnover ≥ £2M and supplying ≥ 50 tonnes of packaging) are additionally required to pay Eco-modulated Fees.
    • Eco-modulated Fees: The UK classifies and rates packaging based on the recyclability of its materials, with higher fees imposed on packaging materials that are difficult or impossible to recycle.
  1. Plastic Packaging Tax (PPT) – Effective 1 April 2022
    • Plastic packaging containing less than 30% recycled content is taxable. If merchants ship on DDP (Delivered Duty Paid) terms and import above the statutory threshold (e.g. 10 tonnes or more of plastic packaging annually), you must register with HMRC (HM Revenue and Customs) and file quarterly returns.

Impact on eCommerce sellers: UK buyers and platforms are increasingly requesting packaging weight sheets, laboratory test reports, and recycled-content certifications. Sellers are advised to obtain these documents from suppliers in advance.

3. Australia – APCO Co-Regulation and the ARL Label

Australia follows a co-regulatory model under the National Environment Protection (Used Packaging Materials) Measure (UPM NEPM). The threshold generally applies to brand owners, importers, and retailers with annual turnover ≥ AUD $5M.

Most eligible businesses choose to join APCO (Australian Packaging Covenant Organisation) and fulfil the following obligations:

  • Regularly submit an Action Plan and an annual APCO Report
  • Design packaging in line with the Sustainable Packaging Guidelines
  • Use the ARL (Australasian Recycling Label) to indicate recycling instructions

Note: Australia is also progressively tightening PFAS (per- and polyfluoroalkyl substances) restrictions on food-contact packaging. Cross-border sellers should closely monitor announcements from the local environmental authorities and APCO.

4. Singapore – Mandatory Packaging Reporting (MPR)

Under the Resource Sustainability Act (RSA), Singapore has implemented Mandatory Packaging Reporting (MPR) since 1 July 2020.

  • Threshold: Producers, importers, and retailers with annual turnover > SGD $10M.
  • Reporting requirements: Within the annual submission window (typically by 31 March each year), businesses must submit via the WRMS (Waste and Resource Management System), a Packaging Report (materials, format, weight), a Methodology Document, and a 3R Plan (Reduce / Reuse / Recycle).
  • Record retention: Data must be kept for at least 5 years.

5. Mainland China – National Standards (GB) Targeting “Excessive Packaging”

China has recently ramped up enforcement against excessive packaging, primarily under the following national standards (GB):

Standard Scope Nature Effective Date
GB 23350-2021 Food and cosmetics Mandatory 1 September 2023
GB/T 31268-2024 General commodity packaging Recommended 1 November 2024
GB 45186-2024 Express delivery packaging Mandatory 1 July 2026


Key considerations for eCommerce sellers:

  • Packaging layers and void ratio: Food, cosmetics, and express delivery packaging are subject to strict limits on the number of layers and the internal void ratio, sellers should avoid “big boxes for small items.”
  • Compliance tip: For shipments to Mainland China, cross-check your outer packaging dimensions and materials against the latest GB standards in advance.

Quick Comparison Table of the 5 Markets

Market Main Regulations / Bodies Effective / Implementation Date Policy Nature Key Focus for Sellers
European Union PPWR (EU) 2025/40 August 12, 2026 Mandatory Monitor PFAS limits, appoint an Authorised Representative (AR), and retain documentation for 5–10 years.
United Kingdom pEPR (Packaging Extended Producer Responsibility) January 1, 2025 Mandatory Verify registration/fee thresholds and provide recycled content verification.
PPT (Plastic Packaging Tax) April 1, 2022 Mandatory
Australia APCO / UPM NEPM Fully Implemented Co-regulatory
Eligible businesses may join APCO or comply with state legislation, and use ARL labeling.
Singapore RSA / Mandatory Packaging Reporting (MPR) July 1, 2020 Mandatory
Businesses with turnovers >”SGD ” $10″M” must submit packaging reports and 3R plans via WRMS.
Mainland China GB 23350 September 1, 2023 Mandatory Strictly control packaging layers and void space to prevent overpackaging.
GB/T 31268 November 1, 2024 Recommended
GB 45186 July 1, 2026 Mandatory

5 Practical Action Steps for eCommerce Sellers

1. Define your role: Determine whether you act as a brand owner, importer, or reseller, obligations differ significantly.
2. Build a packaging database: Record the material and weight of every packaging component for each SKU (outer box, inner lining, bubble wrap, tape, etc.).
3. Request compliance evidence from suppliers: Including material specifications, test reports, and recycled plastic content certifications.
4. Optimise packaging dimensions: Design outer boxes appropriately to avoid violations from excessive packaging or oversized void ratios.
5. Plan ahead for EPR registration and legal consultation: For markets such as the EU and UK, engage professional advisers, officially recognised PROs (Producer Responsibility Organisations), or check target-market government websites for the latest guidance early.

跨境電商 跨境物流 包裝稅 塑膠包裝稅 Plastic Packaging Tax PPT eCommerce Logistics eCommerce fulfillment

ePlus One-Stop Cross-Border Logistics Solutions

Beyond keeping a close eye on changing packaging laws, dependable logistics planning and exceptional customer experiences are crucial for brands expanding overseas. ePlus offers comprehensive cross-border eCommerce logistics solutions, maintaining overseas warehouses in major hubs including Shanghai, Singapore, South Korea, the Netherlands, the United Kingdom, Australia, and the United States to help sellers flexibly manage fulfillment and inventory positioning.

When it comes to warehousing and fulfillment, ePlus accommodates custom packing workflows. Merchants can utilize ePlus‘ FSC-certified eco-friendly cartons, or supply their own specified packaging materials and standard operating procedures for the ePlus team to execute professional and customized fulfillment.

Additionally, our warehouse team offers a diverse range of foundational outer carton sizes and packaging materials to precisely control parcel volume and void space, minimizing material waste and freight expenses. Supported by seamless sea/air freight and customs clearance capabilities, sellers can pre-position stock in target markets via our global warehouses. This significantly shortens delivery lead times and delivers an exceptional unboxing experience for global consumers.

FAQ about International Packaging Compliance

Not necessarily. Turnover thresholds mainly determine EPR (Extended Producer Responsibility) registration and fee obligations, but packaging safety and material restrictions (such as PFAS bans, heavy metal limits, and excessive packaging rules) generally apply to all products placed on that market. In addition, major eCommerce platforms (such as Amazon) may still require sellers to provide compliance documentation.

Yes. If you act as the Importer of Record and your imported plastic packaging reaches the statutory threshold, you must comply with HMRC’s (HM Revenue and Customs) reporting requirements. It is advisable to consult a professional customs broker or tax adviser.

Requirements differ by country. For example, APCO (Australian Packaging Covenant Organisation) members in Australia use the ARL (Australasian Recycling Label), while the EU will introduce standardised material labelling in the future. Design your labels according to the specific rules of each target market, and check for official updates regularly.

Not quite, but it does significantly simplify operations and reporting. Sellers still need to ensure that packaging materials and design meet local regulations. However, by pre-stocking inventory in overseas warehouses, labels and compliance documents can be handled in bulk before shipping, reducing the inspection risk and administrative complexity of clearing each individual order separately.

Depending on local enforcement, consequences may include shipment detention, forced delisting or recall, administrative fines, and even damage to your seller account rating on eCommerce platforms. As policies continue to evolve, sellers are strongly advised to regularly review the latest official announcements or consult a qualified legal adviser to ensure full compliance.

Remember to LIKE e+Solutions Facebook

And FOLLOW e+Solutions Instagram to explore more latest eCommerce logistics information!